Ornament Slip Casting Kit, 2 Inch Round Ornament Mold with 1 Gallon Casting Slip
Ornament Slip Casting Kit, 2 Inch Round Ornament Mold with 1 Gallon Casting Slip
Couldn't load pickup availability
Made to order. Each mold is poured by hand in small batches after you order.
Your casting slip ships separately from the West Coast by UPS Ground. We try to time it so the slip arrives around the same time as your molds.
Estimated delivery: Nov 23 to Dec 2
We are not able to ship to PO boxes.
New to slip casting? Read how slip casting and plaster molds work and what casting slip is and how to use it.
- This kit ships free
Everything you need to cast your own ceramic ornaments. A plaster ornament mold plus a gallon of ready to pour low fire casting slip. Each pour makes 3 round ornaments, and a gallon of slip is enough for many pours.
What's in the kit
- 2 inch round ornament slip casting mold, two part plaster mold that casts 3 ornaments at a time
- 1 gallon low fire white casting slip, cone 06 to 04, ready to pour
How to cast
- Make sure the mold is fully dry before the first pour.
- Stir the slip well, band the mold halves together and fill to the top.
- Let it sit until the wall is about 1/8 inch thick, then pour the extra back into the jug.
- Once the pieces pull away from the plaster, open the mold and let the ornaments dry.
- Clean the seams, then fire to cone 06 to 04. Decorate with glaze, underglaze or acrylic paint.
Kiln firing required. Pieces must be fired to become ceramic.
Shipping
Ships in two boxes: the mold is handmade to order and ships on its own, and the slip ships separately. You'll get tracking for both.
Share
